/ /

How to Find and Fix Missing Exemption Certificates

See every exemption that has no approved certificate on file, how much exempt sales are at risk, and how to close each gap by uploading, requesting, or deactivating.
Updated 13 seconds ago

An exemption without a certificate is a risk you can't see. If a customer is marked exempt but there's no approved certificate on file, every sale that exemption covers goes out tax-free, and an auditor can ask you to prove it. This often happens when exemptions sync in from a connected platform, or when someone adds an exemption by hand and the certificate never arrives.

The Missing Certificates tab in Kintsugi shows you every one of these gaps, and gives you three ways to close each one.

Time required: a few minutes for each customer

You will need:

  • Access to Exemptions in Kintsugi

  • The exemption certificate file/s (if you plan to upload)

  • Premium plan (if you want to request certificates or use Bulk Import)


Why Finding Missing Certificates Matter

An exemption tells Kintsugi not to charge sales tax to a customer in a specific state. The exemption certificate is your proof that the sale was tax-free for a valid reason. If an auditor asks and there's no certificate on file, you may owe the tax that wasn't collected.

Gaps like this usually show up when:

  • A connected platform marks a customer as tax exempt and syncs that exemption to Kintsugi

  • Someone adds an exemption by hand and the certificate never arrives

  • A certificate was uploaded but rejected

An exemption appears on the Missing Certificates tab when the exemption is active but has no approved certificate is on file. Deactivated exemptions don't appear.


Good to Know

Feature

Available on

Missing Certificates tab and summary cards

All plans

Upload a single certificate

All plans

Deactivate an exemption

All plans

Send Request and Bulk Send Certificate Request

Premium

Bulk Import (up to 3,000 certificates at a time)

Premium

Not sure which plan you're on? See Understanding Kintsugi Plans and Billing.


Access the Missing Certificates tab in Kintsugi

[IMAGE 1: Missing Certificates tab overview]

The Summary Cards

  • Uncovered Exemptions: how many active exemptions have no approved certificate. Under the number, Kintsugi shows what share of your active exemptions that is.

  • Exempt Sales at Risk: the total, in dollars, of exempt sales that don't have a valid exemption certificate behind them.

  • Customers Affected: how many customers have uncovered exemptions, and the average number of exemptions per customer.

The Customer Table

Each row shows a customer with uncovered exemptions, their email, jurisdictions, and sales at risk. Expand a row to see each exemption with its jurisdiction, start date, and source.


Find Your Missing Certificates

  1. Open Exemptions.

    In Kintsugi, go to Exemptions.

    [IMAGE 2: Exemptions in the left menu]

  2. Open the Missing Certificates tab.

    Three summary cards appear at the top.

    [IMAGE 3: Missing Certificates tab]

  3. Review the summary cards.

    See the card descriptions below.

    [IMAGE 4: The three summary cards]

  4. Expand a customer. Click the arrow next to a customer to see each exemption missing a certificate. Review the details to identify why it’s flagged and how to fix it.

    [IMAGE 5: Expanded customer row]


How to Fix the Gap of a Missing Certificate

Choose one of these three scenarios that fits your situation:

Scenario

If this is true

Do this

Scenario 1

The customer is exempt and has no certificate is on file even though you already have it

Upload a single certificate or in bulk

Scenario 2

The customer is exempt, no certificate is on file, and you don’t have it yet.

The customer is exempt and the certificate on file is invalid/rejected

Request the exemption certificate, or request them in bulk for multiple customers

Scenario 3

The customer isn't actually exempt in that state

Deactivate the exemption

Fix for Scenario 1: Upload Certificate You Already Have

When a customer is exempt but no certificate is on file—even though you already have it—do this:

Choose either a or b when the certificate/s are already in a folder or inbox: upload (a) one at a time or (b) many at once.

(a) Upload one Certificate

  1. Find the customer. Locate the customer in the Missing Certificates table.

  2. Open the menu. Click the three-dot menu on the customer's row and choose Upload Certificate.

    [IMAGE 6: Three-dot menu with Upload Certificate]

  3. Add the file. Drag and drop the certificate, or click Choose File. Kintsugi accepts PDF, PNG, JPG, and JPEG files.

    [IMAGE 7: Upload Exemption Certificate panel]

  4. Click Upload. Kintsugi checks the certificate right away.

    [IMAGE 8: Upload button]

(b) For multiple customers, upload many certificates at once (Premium)

Have a backlog, like certificates from a previous provider? Bulk Import brings in up to 3,000 certificates at a time. For the full walkthrough, see How to Bulk Upload Exemption Certificates.

  1. Gather your files. Use a ZIP file, or PDF, JPG, JPEG, and PNG files.

  2. Open Import. Go to Exemptions and click the Import button at the top-right corner.

    [IMAGE 9: Import button]

  3. Open Bulk Import. Select the Bulk Import sub-tab.

    [IMAGE 10: Bulk Import sub-tab]

  4. Add your files. Drag and drop them, or click choose files, then click Upload.

    [IMAGE 11: Bulk Import drag-and-drop area]

  5. Wait for the email notification that tells you processing has finished.

    Kintsugi Intelligence reads each certificate, checks it against the state's requirements, screens for duplicates, and matches it to a customer. You get an email when processing is done.

Kintsugi approves the certificate when all of these are true:

  • It passes Kintsugi's standard certificate validation

  • It covers the same state as the exemption

  • At least one detail matches the customer, such as the business name, tax ID, email, or address

When it's approved, the certificate attaches to the existing exemption, the gap closes, and the summary cards update. If the exemption is missing an expiry date, FEIN, or tax ID, Kintsugi fills it in from the uploaded certificate. It never overwrites a value that's already there.

  1. Review the results. Go back to Exemptions and accept or reject each certificate.

    Now, check if the gaps were fixed. Return to the Missing Certificates tab to see whether the gaps were closed. If a customer still shows, try to reupload their certificate from their row.

Fix for Scenario 2: Request the Exemption Certificate

Use this when the customer is exempt but you don't have the exemption certificate to upload, or when the certificate on file is rejected and you are requesting a valid one.

When Kintsugi rejects an exemption certificate, the exemption stays as it was and the gap stays open. Kintsugi shows you the reason, for example:

  • The certificate doesn't cover that state

  • Kintsugi couldn't confirm the certificate belongs to that customer

  • The file couldn't be read (try a clearer scan or a PDF)

  • The file doesn't look like an exemption certificate

  • The certificate didn't pass validation

To fix scenario 2, you may choose either a or b. Both options (Send Request) requires the Premium plan.

(a) Send an exemption certificate request to a customer

  1. Find the customer. Locate the customer in the Missing Certificates table.

    [IMAGE 12: Customer row in the Missing Certificates table]

  2. Add an email if needed. If no email is on file, click Add email and enter one so you can complete the next step.

    [IMAGE 13: Add email link]

  3. Click Send Request. If the Send Request button is grayed out, return to the previous step and add an email.

    [IMAGE 14: Send Request button]

  4. Confirm. A confirmation window shows how many uncertified exemptions the request covers. Click Send Request to proceed. Kintsugi will then email your customer a single request covering every state they're missing.

    [IMAGE 15: Send Request confirmation window]

(b) Request from several customers at once

Select multiple customers, or click the table header checkbox to select all customers. Then click Bulk Send Certificate Request. Each customer still gets one email for all their missing states.

[IMAGE 16: Bulk Send Certificate Request]

Exemptions > Missing Certificates > Select Multiple or Select All > Bulk Send Certificate Request

IMPORTANT NOTE: Customers without an email on file are skipped.

Track the status of each request on the Requests tab. To follow up automatically, see How to Automate Exemption Certificate Reminders in Kintsugi.

[IMAGE 17: Requests tab]

What Your Customer Sees

[IMAGE 18: Customer request email and upload page]

  • An email from Kintsugi titled "Tax exemption certificate request from" followed by your business name

  • A secure link to an upload page with a checklist of the states you need

  • A result for each file as it's checked, so they know right away if something is missing or wrong

Your customer can upload PDF, PNG, and JPG files. ZIP files aren't accepted on this page. They can submit the certificates they have, even if some states are still missing. Approved certificates close the gap automatically.

Fix for Scenario 3: Deactivate the Exemption

Use this when the exemption shouldn't exist, for example because the customer isn't actually exempt in that state.

  1. Expand the customer. Click the arrow next to the customer.

  2. Click Deactivate. Click Deactivate next to the exemption you want to remove.

    [IMAGE 19: Deactivate action on an exemption]

To deactivate every exemptions for a customer, click the three-dot menu on their row and choose Deactivate All Exemptions.

[IMAGE 20: Deactivate All Exemptions in the three-dot menu]

The exemption stops applying to future sales. It leaves the Missing Certificates tab and no longer counts in the summary cards.

Only deactivate an exemption you're sure is wrong. If the customer is exempt and you don't have the paperwork yet, request the certificate instead.


Stay on Top of New Gaps

  • A Missing Exemption Certificates task on your Dashboard lets you know when gaps are open.

  • A daily digest email reminds you about open gaps.

  • Approvals and deactivations update the summary cards right away. New exemptions from a sync or added by hand show up after the daily refresh.


Things to Know

  • Uploading a certificate here never creates a new exemption. It attaches to the exemption your customers already have.

  • A certificate that covers more states than you asked for doesn't create extra exemptions.

  • The state on the certificate must match the state on the exemption. A certificate for a different state is always rejected.

  • Business names are matched as written, including endings like Corp or Inc. "Acme Corp" and "Acme Inc" count as different names unless another detail, like the tax ID, matches.

  • This tab doesn't track certificates that are about to expire. Use automated reminders for that.

  • Each customer can have one open request at a time. You can't send another until the current one closes.

  • Request links expire after 60 days.

  • Send Request, Bulk Send Certificate Request, and Bulk Import need the Premium plan.


FAQs

Why is a customer here when I know they're exempt?
Being exempt and having proof on file aren't the same thing. The customer appears because there's no approved certificate attached to the exemption. Upload the certificate or request it to close the gap.

Where did these exemptions come from?
Usually from a connected platform that marks customers as tax exempt, or from exemptions added by hand without a certificate. Expand the customer to see the source of each exemption.

Does uploading here create a new exemption?
No. The certificate attaches to the exemption you already have.

Why was my certificate rejected?
he most common reasons are a certificate for a different state, no detail that matches the customer, or a file that's hard to read. Kintsugi shows the reason on the customer's row. Fix the issue and upload again.

How is Exempt Sales at Risk calculated?
It adds up the exempt sales to each customer in each state with a missing certificate, from the exemption's start date to its end date, or to today if there's no end date.

Why is Send Request unavailable?
If it's unavailable for one customer, they likely have an open request already. If it's locked for every customer, your plan may not include certificate requests. Selecting it shows you how to talk to our sales team.

What happens if my customer ignores the request?
Nothing changes on your side until a certificate arrives. The link expires after 60 days, and you can send a new request after that.

I added an exemption today. Why isn't it on the tab yet?
New exemptions from a sync or added by hand show up after the daily refresh. Check again tomorrow.

Does deactivating an exemption delete it?
No. It stops the exemption from applying to future sales and removes it from the Missing Certificates tab and the summary cards.


Related Articles


Need Help?

For further concerns, we're always here to help. If you can't find the answer you're looking for, reach out to us using the chat in the bottom right corner of your screen.

Was this article helpful?